Training Hub
Module 11Not Started
Night Load-In Chaos
Strobes, haze, darkness, and sensitive floors
6 min read 8 scenarios · 80% to pass
Why this matters
At 2:00 AM after a long shift, your eyes and brain are not working at full capacity. The venue adds strobes, haze, and darkness. Routine moves become dangerous.
Module briefing
01
Flash Blindness Protocol
Lighting crews test strobes without warning. A flash wipes your night vision for seconds.
- STOP the machine IMMEDIATELY — velocity drops to zero
- Do not try to keep moving slowly — you are blind
- Do not lean out the cage to see better
- Do not trust muscle memory to finish the move
- Hold position. Wait for vision to return. Only then continue.
Hard Rule· Zero velocity when vision is compromised
Every time. There is no slow-and-careful version of driving blind.
02
Tire Scrubbing on Sensitive Floors
A spinning pivot turn burns through plywood and scars the hardwood underneath.
- Keep the machine ROLLING slightly during all turns
- Never execute a full stationary pivot (spinning in place)
- Use slow, arcing turns — like a car making a U-turn
- If space is too tight, back-and-fill in small increments rather than spinning
Tour Reality· Billed to the tour
Gouged NBA hardwood costs thousands — and it lands on the production's invoice. Rolling turns protect the floor and the budget.
03
Ice Rink Insulation Trap
Many arenas have temporary insulated decking over ice rinks. Parking a heavy machine in one spot compresses the panels and 'cold-sweats' where insulation meets the ice — a subtle sag that tilts your machine.
Never park heavy loads long-term over arena ice decking. Keep the machine or load moving, or move to a solid perimeter edge with structural support. If you must hold, keep the load elevated — not sitting on the deck.
Deliberate Practice
Interactive Scenario Trainer
Begin Interactive Scenarios
8 real situations from the floor. Type your decision — the trainer grades it against the named technique and gives you instructor-level feedback. Pass mark: 80%.